County of Union Standard Map Notes and Disclaimers
” 2004 County of Union. All rights reserved. This map may not be modified, altered, or distributed without the expressed written permission of the County of Union. All secondary map products produced with data extracted from this map shall properly credit the County of Union, Bureau of GIS as the source of this data, and note that the County of Union did not prepare, review, or endorse the secondary map product.
THE COUNTY OF UNION MAKES NO REPRESENTATION OF ANY KIND INCLUDING, BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY OR FITNESS OF USE FOR ANY PARTICULAR PURPOSE, NOR ARE SUCH WARRANTIES IMPLIED.
This map and all data contained within are supplied as is with no warranty. The County of Union expressly disclaims responsibility for damages or liability from any claims that may arise out of the use or misuse of this map. The data depicted here has been developed specifically for the conduct of County of Union business and for no other purpose. It is the sole responsibility of the user to determine if the data on this map meets the userís needs. This map was not created as survey data, nor should it be used as such. It is the userís responsibility to obtain proper survey data, prepared by New Jersey Licensed Land Surveyor, where required by New Jersey Law.
Standard Source Notes
BAE Systems ADR created feature classes obtained by digitizing aerial photography. These features include building footprints, roads, edge of pavement, railroads, bodies of water and contours. Color digital orthophotography and limited planimetric mapping were completed for the 21 municipalities of Union County. These products were compiled from aerial photography obtained on April 10, 1999 at a negative scale of 1" = 100'. Orthos for Elizabeth, Linden and Rahway were generated at a scale of 1" = 50' with a Ĺ' pixel resolution, while the orthos for the remaining 18 municipalities were generated at a scale of 1" = 100' with a 1' pixel resolution and delivered in uncompressed tif format and jpg compressed format.
Feature classes not created by ADR were created by the County of Union, Bureau of GIS. Please contact the Bureau of GIS for a copy of the metadata for those layers.
All GIS feature classes are based on the New Jersey State Plane Coordinate System, the North American Datum 1983, and North American Vertical Datum 1988.